WMS-G-01 Rev 0 IDM Engineering (Chester) Ltd

Owner

CRGI > RWC

Approval

Determined by · RWC — approved

Standard

BS EN 15085-2

Filed

00 System Manual and Control/04 Scope and Class Determinations

Certification Level Determination Record

Controlled master

The controlled master is the file on the IDM server, at the location shown above. Download it here; the text below is a convenience rendering of the same document. Where the two differ, the server file governs.

Records how the BS EN 15085-2 Certification Level was determined for IDM's rail work. The level follows from the weld performance classes of the components — it is not chosen.

Field	Entry
Rail product range
Customers	Alstom
Weld performance classes arising	CP C2 evidenced on drawing 24308. Complete for the remainder of the range.
Weld inspection classes arising	CT 3 evidenced on drawing 24308. Complete for the remainder of the range.
Standard used	BS EN 15085-2 and BS EN 15085-3 — enter the editions held
Customer imposition	CL2 imposed in writing by Alstom, drawing 24308 (Class 22X grille cover), note 4. Referenced standard DTRF 150215 Rev J.
CERTIFICATION LEVEL DETERMINED	CL2, across the rail product range
RWC competence required	Comprehensive technical knowledge for CL2 — evidence outstanding (WMS-G-06)
Date of determination
Review trigger	Any enquiry indicating a weld performance class above the range covered by CL2

Drawing 24308 is stamped as an advanced copy for validation only. Confirm the released revision before this record is signed.

Role	Name	Signature	Date
Determined by
RWC — approved

Controlled copy. The controlled master of every document in this system is the file held on the IDM server in the welding management system folder structure. This portal is a controlled view of it. Where the two differ, the server file governs.